Tasman Retaining Wall System

ret baines  tasmanThe Tasman™ retaining wall system incorporates purpose made corner and capping units to provide classical reconstructed sandstone retaining walls. The unique design of the Tasman wall system allows increased flexibility over competing products. The Tasman walls can be built almost vertical. Each block has only a 10mm setback, which allows all available space to be utilised to the maximum. Curved or straight walls can be erected and it is easy to build 90-degree corners with the purpose made corner blocks. A capping unit is adhered to the top course of blocks to finish off the wall.

The blocks are easily dry-stacked and their patented design locks into the block above to form an attractive structural retaining wall. For walls over 660mm high, FORTRAC® geogrid is locked in every 2nd course of blocks to create a reinforced soil retaining wall structure. Seek specific engineering advice for walls over 660mm high, walls carrying car traffic or to comply with most council requirements. The Tasman™ system is manufactured with a water repellent admixture to add to its quality.

Sizes:

Full Blocks - 390 x 225 x 200mm (13 per m2)
Tasman Half Blocks - 190 x 225 x 200mm
Tasman Half caps - 200 c 225 c 60mm
Tasman Full Caps - 390 x 225 x 60mm
Tasman Full Corners (Left and right) - 340 x 145 x 200mm
Tasman Half Corners - 235 x 145 x 200mm

Colours available: Appin Stone, Charcoal, Oakdale, Penrose, Bushrock, Opal White, Red Rock, Yellow Rock.

For walls over 660mm please seek specific engineering advice.

Features & Benefits

  • Near Vertical Walls
  • Do it Yourself
  • No Concrete Footings Required
  • Flexible
  • 90° Corners, Steps, Straight or Curved Walls
  • Walls to 660mm high without reinforcement or engineering (subject to local council requirements)

Enquiry

Fields marked with * are required